Siemens MC55 - Manual (Page 150)

MC55 AT Command Set
7.8 ATDL
s
m
obile
MC55_ATC_V01.05 Page 150 of 469 2/10/04
Confidential / Released
7.8 ATDL Redial last telephone number used
Syntax
Command Description
This command redials the last voice and data call number used in the ATD command. If terminated with semi-
colon ";" ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, the last dialed data or
fax number will be used (not contained in the "LD" phonebook).
Note
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
Exec Command
ATDL
[;]
Response(s)
If there is no last number or number is not valid:
+CME ERROR
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
If successfully connected and non-voice call (TA switches to online data mode):
CONNECT <text>
When TA returns to command mode after call release:
OK
If successfully connected and voice call:
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % § % § §
Reference(s)
V.25ter