7 siemens release cause for l3 call control (cc), Siemens release cause for l3 call control (cc), Obile – Siemens MC55 User Manual
Page 80
MC55 AT Command Set
3.4 AT+CEER
s
m
obile
MC55_ATC_V01.05
Page 80 of 469
2/10/04
Confidential / Released
3.4.7
SIEMENS release cause for L3 Call Control (CC)
Invalid message (e.g. parameter out of range) class
81
Invalid transaction identifier value
87
User not member of CUG
88
Incompatible destination
91
Invalid transit network selection
95
Semantically incorrect message
Protocol error (e.g. unknown message) class
96
Invalid mandatory information
97
Message type non-existant or not implemented
98
Message type not comaptible with protocol state
99
Information element non-existent or not implemented
100
Conditional information element error
101
Message not compatible with protocol
102
Recovery on timer expiry
111
Protocol error, unspecified
Interworking class
127
Interworking, unspecified
Number
Description
1
Call dropped
2
Service not available
3
Hold procedure not available
4
Temporary no service, previous procedure not yet finished
5
No speech service available
6
Call reestablishment procedure active
7
Mobile received a release (complete) message during a modify procedure (modify reject)
8
Call clearing, because loss of radio connection, if no reestablishment is allowed (call not
active)
10
Number not included in FDN list
Notifications
300
Called party barred incoming call
Number
Description