22 at+frh receive data using hdlc framing, Obile – Siemens MC55 User Manual
Page 305
Advertising
MC55 AT Command Set
11.22 AT+FRH
s
m
obile
MC55_ATC_V01.05
Page 305 of 469
2/10/04
Confidential / Released
11.22
AT+FRH Receive Data Using HDLC Framing
Syntax
Command Description
This command causes the TA to receive frames using the HDLC protocol and the modulation defined below. An
ERROR response code results if this command is issued while the modem is on-hook.
Note
• Used for Fax Class 1 only
Write Command
AT+FRH=
Response(s)
CONNECT
If error related to ME functionality
ERROR
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
!
%
!
!
Reference(s)
TIA/EIA-578
Advertising