Siemens MC55 - Manual (Page 399)

MC55 AT Command Set
16.7 AT+VTS
s
m
obile
MC55_ATC_V01.05 Page 399 of 469 2/10/04
Confidential / Released
16.7 AT+VTS DTMF and tone generation
The Write command is intended to send ASCII characters or strings which cause the Mobile Switching Center
(MSC) to transmit DTMF tones to a remote subscriber. It works during active voice calls only and offers the fol-
lowing variants:
•
AT+VTS
=
<dtmfString>
allows to send a sequence of DTMF tones with a duration defined with
AT+VTD
.
•
AT+VTS
=
<dtmf>
[,
<duration>
] allows to send a single DTMF tone. In this case, the duration can be ind-
vidually determined during the call.
Syntax
Parameter Description
String of ASCII characters in the set 0-9,#,*,A, B, C, D. Maximal length of the string is 29. The string must be
enclosed in quotation marks ("...").
ASCII character in the set 0...9,#,*, A, B, C, D.
Test Command
AT+VTS=?
Response(s)
+VTS:
(list of supported
<dtmf>
s), (list of supported
<duration>
s)
OK
Write Command
AT+VTS= <dtmfString>
Response(s)
OK
Write Command
AT+VTS= <dtmf>
[,
<duration>
]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07
<dtmfString>
(str)
<dtmf>
(str)