Siemens MC55 - Manual (Page 234)

MC55 AT Command Set
9.9 AT+CLIP
s
m
obile
MC55_ATC_V01.05 Page 234 of 469 2/10/04
Confidential / Released
Command Description
This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that
enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter-
minated call.
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the
supplementary service CLIP in the network.
Parameter Description
[0] (&F) suppress unsolicited result codes
1 display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
string type phone number of calling address in format specified by
<type>
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of originating
network.
<number>
shall be an empty string ("") and
<type>
value will not be
significant.
When CLI is not available (
<CLI validity>
=2),
<number>
shall be an empty string ("") and
<type>
value
will not be significant. Nevertheless, TA shall return the recommended value 128 for
<type>
(TON/NPI
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator, (
<CLI validity>
=1) and the CLIP is provisioned with the
"override category" option (refer GSM 02.81 and GSM 03.81),
<number>
and
<type>
is provided. Otherwise,
TA shall return the same setting for
<number>
and
<type>
as if the CLI was not available.
<n>
(num)(&W)(&V)
<m>
(num)(&V)
<number>
(str)
<type>
(num)
<CLI validity>
(num)