Siemens MC55 - Manual (Page 442)

MC55 AT Command Set
18.4 ATS5
s
m
obile
MC55_ATC_V01.05 Page 442 of 469 2/10/04
Confidential / Released
18.4 ATS5 Write command line editing character
Syntax
Command Description
This parameter setting determines the character recognized by TA as a request to delete the immediately pre-
ceding character from the command line.
Parameter Description
command line editing character
000...8 (&F) ...127
Read Command
ATS5?
Response(s)
<n>
OK
Write Command
ATS5= <n>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
V.25ter
<n>
(num)(&W)(&V)