Siemens MC55 - Manual (Page 405)

MC55 AT Command Set
16.10 AT^SNFD
s
m
obile
MC55_ATC_V01.05 Page 405 of 469 2/10/04
Confidential / Released
16.10 AT^SNFD Set audio parameters to manufacturer default values
Syntax
Command Description
TA sets the active audio parameters to manufacturer defined default values.
Notes
• The restored values are:
AT^SNFI
:
<inBbcGain>
,
<inCalibrate>
(or the equivalent
AT^SNFA
parameters)
AT^SNFO
:
<outBbcGain>
,
<outCalibrate>
[0 to 4],
<sideTone>
AT^SAIC
:
<io>
,
<mic>
,
<ep>
AT^SNFS
:
<audMode>
• Remember that the factory set audio mode 1 is fixed to
<outStep>
=4. Consequently,
AT^SNFD
restores
<audMode>
together with
<outStep>
=4, but does not affect the values of
<outStep>
currently selected in
audio modes 2 - 6. This means, if
<audMode>
=1, the read commands
AT^SNFO
,
AT^SNFV
and
AT+CLVL
will
always return
<outStep>
=4. In all other modes the
<outStep>
value is retained until explicitly changed.
Test Command
AT^SNFD=?
Response(s)
OK
Exec Command
AT^SNFD
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS