Siemens MC55 - Manual (Page 374)

MC55 AT Command Set
15.3 AT+CPBS
s
m
obile
MC55_ATC_V01.05 Page 374 of 469 2/10/04
Confidential / Released
15.3 AT+CPBS Select phonebook memory storage
This command is used to select the active phonebook storage, i.e. the phonebook storage that all subsequent
phonebook commands will be operating on.
The read command can be used only after the phonebook data from the SIM have been read successfully for
the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30
seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the phone-
book commands will result in "+CME Error: 14" (SIM busy).
Syntax
Command Description
The test command returns supported
<storage>
s as compound value.
The read command returns the currently selected
<storage>
, the number of
<used>
entries and the
<total>
number of entries available for this storage.
Test Command
AT+CPBS=?
Response(s)
+CPBS:
(list of supported
<storage>
s)
OK
+CME ERROR
Read Command
AT+CPBS?
Response(s)
+CPBS: <storage>
,
<used>
,
<total>
OK
+CME ERROR
Write Command
AT+CPBS= <storage>
Response(s)
OK
+CME ERROR:
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM07.07