7 at^spbg read current phonebook entries, At^spbg, Obile – Siemens MC55 User Manual
Page 383: Mc55 at command set
MC55 AT Command Set
15.7 AT^SPBG
s
m
obile
MC55_ATC_V01.05
Page 383 of 469
2/10/04
Confidential / Released
15.7
AT^SPBG Read current Phonebook entries
This command can be used to display the phonebook records of the phonebook currently selected with
in sorted order by name. The sort order is described in
, "Sort order for Phonebooks".
There are two ways to use command
:
is omitted: Please note that the sorted entries are assigned an
index of their own which is not identical with the location numbers used in the various phonebooks.
In this case, command
can be used for reading only. For example, it helps you find entries starting
with matching characters. Do not use the listed index numbers to dial out or modify entries.
• To access an entry found with
for editing or dialing, enter
=1.
Then extract the "real" location number of the entry from response parameter
or
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBG=?
Response(s)
^SPBG:
(1-
OK
ERROR
+CME ERROR
Write Command
AT^SPBG=
][,
]
Response(s)
[
,
,
] ]
[
,
,
] ]
OK
ERROR
+CME ERROR
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
%
%
%
%
%
%
Reference(s)
SIEMENS