Siemens MC55 - Manual (Page 190)

MC55 AT Command Set
8.3 AT+CREG
s
m
obile
MC55_ATC_V01.05 Page 190 of 469 2/10/04
Confidential / Released
8.3 AT+CREG Network registration
Syntax
Unsolicited Result Codes
URC 1
If
<n>
=1 and there is a change in the ME network registration status:
+CREG: <stat>
URC 2
If
<n>
=2 and there is a change in the ME network registration status or a change of the network cell:
+CREG: <stat> [, <lac> , <ci> ]
Test Command
AT+CREG=?
Response(s)
+CREG:
(list of supported
<n>
s)
OK
Read Command
AT+CREG?
Response(s)
+CREG: <n>
,
<stat>
[,
<lac>
,
<ci>
]
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CREG=
[
<n>
]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07