Siemens MC55 - Manual (Page 285)

MC55 AT Command Set
11.3 AT+FBADMUL
s
m
obile
MC55_ATC_V01.05 Page 285 of 469 2/10/04
Confidential / Released
11.3 AT+FBADMUL Error Threshold Multiplier
Syntax
Command Description
This command defines the "Copy-Quality-OK" multiplier. The number of lines received with a bad pixel count is
multiplied by this number. If the result exceeds the total number of lines on the page the error rate is considered
too high. A threshold multiplier value of 20 corresponds to a 5 per cent error rate. A value of 0 implies that error
checking is not present or disabled.
Parameter Description
0...20 (P) ...255
Note
• Used for Fax Class 2 only
Read Command
AT+FBADMUL?
Response(s)
<badmul>
OK
Write Command
AT+FBADMUL= <badmul>
Response(s)
OK
If error is related to ME functionality:
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
<badmul>
(num)