Siemens MC55 - Manual (Page 144)

MC55 AT Command Set
7.4 ATD><mem><n>
s
m
obile
MC55_ATC_V01.05 Page 144 of 469 2/10/04
Confidential / Released
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by
AT+CPBR
.
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
Notes
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
• There is no
<mem>
for emergency call ("EN").
• The command is not applicable to data calls. Any attempt to dial a data call number from
<mem>
causes the
result code "NO CARRIER" to appear.
• Parameter
<mgsm>
only if no *# code is within the dialing string.
• See
ATX
for setting result code and call monitoring parameters.
Examples
EXAMPLE 1
To query the location number of the phonebook entry:
TA returns the entries available in the active phonebook.
EXAMPLE 2
To dial a number from the SIM phonebook, for example the number stored to location 15:
EXAMPLE 3
To dial a phone number stored in the last dial memory on the SIM card:
<n>
(num)
<mgsm>
(str)
AT+CPBR=1,xx
ATD>SM15;
OK
ATD>LD9;
OK