2 superscript notation for parameters and values, Superscript notation for parameters and values, Table 1.1 – Siemens MC55 User Manual
Page 16: Table 1.2, Obile
MC55 AT Command Set
1.3 Document conventions
s
m
obile
MC55_ATC_V01.05
Page 16 of 469
2/10/04
Confidential / Released
1.3.2
Superscript notation for parameters and values
Table 1.1:
Symbols used to indicate the correlations with other commands
Table 1.2:
Symbols used to mark different types of default values of parameters
Parameter option
Meaning
<param>
(&W)
Parameter value will be stored with
<param>
(&V)
Parameter value will be displayed with
<param>
(ˆSNFW)
Parameter value will be stored with
<param>
(+CSCS)
Parameter value has to be (is) coded according to current setting of
(see
for details)
Value option
Meaning
[x]
Default value: if the parameter is omitted, the value 'x' will be assumed
x
(&F)
Factory default value, will be restored to 'x' with
x
(P)
Powerup default value of a parameter which is not stored at power down
x
(D)
Delivery default value of a parameter which cannot be restored automatically