13 at+fdt data transmission, At+fdt, Obile – Siemens MC55 User Manual
Page 296
Advertising
MC55 AT Command Set
11.13 AT+FDT
s
m
obile
MC55_ATC_V01.05
Page 296 of 469
2/10/04
Confidential / Released
11.13
AT+FDT Data Transmission
Syntax
Command Description
This command requests the ME to transmit a Phase C page. When the ME is ready to accept Phase C data, it
issues the negotiation responses and the CONNECT result code to the application.
In Phase B, the
command releases the ME to proceed with negotiation, and releases the DCS message
to the remote station. In Phase C, the
command resumes transmission after the end of a data stream
transmited before.
Note
• Used for Fax Class 2 only
Exec Command
AT+FDT
Response(s)
CONNECT
Write Command
AT+FDT=
,
Response(s)
CONNECT
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
!
%
!
!
Reference(s)
EIA PN-2388
Advertising