Siemens MC55 - Manual (Page 21)

MC55 AT Command Set
1.5 Supported character sets
s
m
obile
MC55_ATC_V01.05 Page 21 of 469 2/10/04
Confidential / Released
1.5.1 GSM alphabet tables and UCS2 character values
This section provides tables for the GSM 03.38 alphabet supported by the ME. Below any GSM character find
the corresponding two byte character value of the UCS2 alphabet.
1) This code is an escape to the following extension of the 7 bit default alphabet table.
2) This code is not a printable character and therefore not defined for the UCS2 alphabet. It shall be treated as the accom-
panying control character.
Figure 1.1: Main character table of GSM 03.38 alphabet