Siemens MC55 - Manual (Page 388)

MC55 AT Command Set
15.8 AT^SPBS
s
m
obile
MC55_ATC_V01.05 Page 388 of 469 2/10/04
Confidential / Released
you find entries starting with matching characters. However, do not use the listed index numbers to dial out
with
ATD><mem><n>
or to modify entries with
AT+CPBW
.
• To access an entry found with
AT^SPBS
for editing or dialing, enter
AT^SPBS
with the parameter
<RealLo-
cReq>
=1. Then extract the "real" location number of the entry from response parameter
<location>
and
use this "real" location number with
ATD><mem><n>
or
AT+CPBW
.
See examples below.
Parameter Description
1 To make a step forward in the alphabetically sorted phonebook.
2 To make a step backward in the alphabetically sorted phonebook.
1...maxindex The index in the sorted list of phonebook entries that identifies the first entry
displayed.
The value of
<index-a>
is determined by the value of the
<internal-
counter>
and by parameter
<value>
.
After a write command has terminated successfully with "OK", the value from
parameter
<index-a>
is saved and retained as the new
<internal-
counter>
value.
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the second entry
displayed.
<index-b>
= (
<index-a>
+1).
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the third entry
displayed.
<index-c>
= (
<index-b>
+1).
Mind after the last record of phonebook, the first entry follows.
string type phone number in format specified by
<type>
.
the number parameter may be an empty string.
type of address octet
145 dialling string
<number>
includes international access code character '+'
<value>
(num)
<index-a>
(num)
<index-b>
(num)
<index-c>
(num)
<number>
(str)
<type>
(num)