Siemens MC55 - Manual (Page 303)

MC55 AT Command Set
11.20 AT+FPHCTO
s
m
obile
MC55_ATC_V01.05 Page 303 of 469 2/10/04
Confidential / Released
11.20 AT+FPHCTO DTE Phase C Response Timeout
Syntax
Command Description
The time-out value
<tout>
determines how long the DCE will wait for a command after reaching the end of data
when transmitting in Phase C. When time-out is reached, the DCE assumes that there are no more pages or
documents to send.
Parameter Description
Timeout
Value in 100ms units
0...30 (P) ...255
Note
• Used for Fax Class 2 only
Read Command
AT+FPHCTO?
Response(s)
<tout>
OK
Write Command
AT+FPHCTO= <tout>
Response(s)
OK
If error is related to ME functionality
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
<tout>
(num)