Siemens MC55 - Manual (Page 419)

MC55 AT Command Set
16.17 AT^SNFV
s
m
obile
MC55_ATC_V01.05 Page 419 of 469 2/10/04
Confidential / Released
16.17 AT^SNFV Set loudspeaker volume
Syntax
Command Description
The test command returns the supported values of the parameter
<outStep>
.
The read command returns the current value of parameter
<outStep>
.
The write command can be used to set the volume of the loudspeaker to the value
<outCalibrate>
addressed
by
<outStep>
.
Parameter Description
The actual volume of each step is defined by the parameter
<outCalibrate>
, which can be set with
AT^SNFO
.
0...4 (P)
Test Command
AT^SNFV=?
Response(s)
^SNFV:
(list of supported
<outStep>
s)
OK
Read Command
AT^SNFV?
Response(s)
^SNFV: <outStep>
OK
Write Command
AT^SNFV= <outStep>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
<outStep>
(num)