Siemens MC55 - Manual (Page 357)

MC55 AT Command Set
13.1 AT+CRSM
s
m
obile
MC55_ATC_V01.05 Page 357 of 469 2/10/04
Confidential / Released
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
this is the identifier for an elementary data file on SIM. Mandatory for every command except STATUS
Parameter to be passed on by the ME to the SIM; refer GSM 11.11.
0...255
Parameter to be passed on by the ME to the SIM; refer GSM 11.11.
0...255
Parameter to be passed on by the ME to the SIM; refer GSM 11.11.
0...255
Information which shall be written to the SIM (hexadecimal character format)
Status information from the SIM about the execution of the actual command. These parameters are delivered
to the TE in both cases, on successful or failed execution of the command; refer GSM 11.11.
0...255
Status information from the SIM about the execution of the actual command. These parameters are delivered
to the TE in both cases, on successful or failed execution of the command; refer GSM 11.11.
0...255
Response of a successful completion of the previously issued command.
STATUS and GET RESPONSE commands return data, which gives information about the current elementary
datafield. This information includes the type of file and its size (refer GSM 51.011).
After READ BINARY or READ RECORD command the requested data will be returned.
<response>
is not returned after a successful UPDATE BINARY or UPDATE RECORD command.
<fileID>
(num)
<P1>
(num)
<P2>
(num)
<P3>
(num)
<data>
(str)
<sw1>
(num)
<sw2>
(num)
<response>
(str)