Pdp_type, Obile – Siemens MC55 User Manual
Page 263
MC55 AT Command Set
10.9 AT+CGQREQ
s
m
obile
MC55_ATC_V01.05
Page 263 of 469
2/10/04
Confidential / Released
15
5 000 000 (~11.1 kbit/s)
16
10 000 000 (~22 kbit/s)
17
20 000 000 (~44 kbit/s)
18
50 000 000 (~111 kbit/s)
31
best effort
Packet Data Protocol type
“IP“
Notes
• If parameters are not defined, the parameter default values depend on the HLR-stored subscribed default val-
ues.
• Definitions of parameters in GSM 02.60 and GSM 03.60 paragraph 15.2 "Quality of Service Profile".
Example
If some of the QoS parameters are omitted, they will keep their current value (or the default value if not specified
so far), e.g.:
<PDP_type>
(str)
AT+CGDCONT=1,''ip''
OK
AT+CGQREQ=
OK
AT+CGQREQ?
OK
AT+CGQREQ=1,0
OK
AT+CGQMIN?
+CGQREQ:1,0,0,0,0,0
OK
AT+CGQREQ=1,0,0,0,1
OK
AT+CGQREQ?
+CGQREQ:1,0,0,0,1,0
OK
AT+CGQREQ=1,1
OK
AT+CGQREQ?
+CGQREQ:1,1,0,0,1,0
OK