Obile, Mc55 at command set – Siemens MC55 User Manual

Page 387

Advertising

MC55 AT Command Set

15.8 AT^SPBS

obile

MC55_ATC_V01.05

Page 387 of 469

2/10/04

Confidential / Released

15.8

AT^SPBS Step through the selected phonebook alphabetically

This command can be used to scroll sequentially through the active phonebook records in alphabetical order by
name. Three entries will be displayed at a time.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
This command can be used for the ME, SM and FD phonebook.

Syntax

Command Description

Test command returns a list of supported

<value>

Every time the write command is executed, 3 rows of phone book records are returned. Each triplet overlaps with
the next one. The actual index depends on parameter

<value>

. This parameter determines whether the index

will be increased or decreased.
If the index in one output line reaches the last index in the alphabetical list, the next output line will display the
first list entry.
After the last record of the phonebook has been reached (see parameter

for

), the

switches over to the first.

There are two ways to use command

AT^SPBS

• If the optional parameter

is omitted or (0): In this case, the sorted list is assigned an index

of its own which is not identical with location numbers used in the various phonebooks. For example, it helps