Siemens MC55 - Manual (Page 52)

MC55 AT Command Set
2.12 AT+CSCS
s
m
obile
MC55_ATC_V01.05 Page 52 of 469 2/10/04
Confidential / Released
2.12 AT+CSCS Select TE character set
Syntax
Command Description
Write command informs TA which character set
<chset>
is used by the TE. TA is then able to convert character
strings correctly between TE and ME character sets.
Parameter Description
“GSM“ (&F) GSM default alphabet (GSM 03.38 subclause 6.2.1);
Note: This setting may cause software flow control problems since the codes
used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)
are interpreted as normal characters.
“UCS2“ 16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2
character strings are converted to hexadecimal numbers from 0000 to FFFF;
e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98
and 99, $(AT R97)$
Test Command
AT+CSCS=?
Response(s)
+CSCS:
(list of supported
<chset>
s)
OK
Read Command
AT+CSCS?
Response(s)
+CSCS: <chset>
OK
Write Command
AT+CSCS=
[
<chset>
]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07, GSM 11.11
<chset>
(str)