Siemens MC55 - Manual (Page 245)

MC55 AT Command Set
10.2 AT+CGANS
s
m
obile
MC55_ATC_V01.05 Page 245 of 469 2/10/04
Confidential / Released
10.2 AT+CGANS Manual response to a network request for PDP con-
text activation
Syntax
Command Description
The write command requests the MT to respond to a network request for GPRS PDP context activation which
has been signaled to the TE by the RING or CRING unsolicited result code. The
<response>
parameter allows
the TE to accept or reject the request.
Parameter Description
[0] the request is rejected and the MT returns OK to the TE
1 accept and request that the PDP context be activated
a string parameter which indicates the layer 2 protocol to be used (see
AT+CGDATA
command)
a numeric parameter which specifies a particular PDP context definition (see
AT+CGDCONT
command).
Test Command
AT+CGANS=?
Response(s)
+CGANS:
(list of supported
<response>
s), (list of supported
<L2P>
s)
OK
Write Command
AT+CGANS=
[
<response>
[,
<L2P>
[,
<cid>
]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
<response>
(num)
<L2P>
(str)
<cid>
(num)