Siemens MC55 - Manual (Page 143)

MC55 AT Command Set
7.4 ATD><mem><n>
s
m
obile
MC55_ATC_V01.05 Page 143 of 469 2/10/04
Confidential / Released
7.4 ATD><mem><n> Originate call to phone number in memory
Syntax
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
Phonebook storage:
For detailed description of storages see
AT+CPBS
.
“FD“ Fixed dialing phonebook
“SM“ (&F) SIM phonebook
“ON“ MSISDN list
“ME“ Mobile Equipment Phonebook
“LD“ Last number dialed phonebook
“MC“ Missed (unanswered received) calls list
“RC“ Received calls list
Exec Command
ATD> <mem><n>
[
<mgsm>
];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % § % § §
Reference(s)
V.25ter
<mem>
(str)