Siemens MC55 - Manual (Page 253)

MC55 AT Command Set
10.6 AT+CGDCONT
s
m
obile
MC55_ATC_V01.05 Page 253 of 469 2/10/04
Confidential / Released
10.6 AT+CGDCONT Define PDP Context
Syntax
Command Description
The test command returns supported values as a compound value.
The read command returns the current settings for each defined PDP context.
The write command specifies the parameters for a PDP context identified by the context identifier
<cid>
. The
number of contexts that may be in a defined state at the same time is given by the range returned by the test
command. A special form of the write command (
AT+CGDCONT
=
<cid>
) causes the values for context
<cid>
to
become undefined.
Test Command
AT+CGDCONT=?
Response(s)
+CGDCONT:
(range of supported
<cid>
s),
<PDP_type>
, , , (list of supported
<d_comp>
s), (list of supported
<h_comp>
s)
OK
ERROR
+CME ERROR
Read Command
AT+CGDCONT?
Response(s)
+CGDCONT: <cid>
,
<PDP_type>
,
<APN>
,
<PDP_addr>
,
<d_comp>
,
<h_comp>
...
OK
ERROR
+CME ERROR
Write Command
AT+CGDCONT=
[
<cid>
[,
<PDP_type>
[,
<APN>
[,
<PDP_addr>
]]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07