Siemens MC55 - Manual (Page 282)

MC55 AT Command Set
11.1 FAX parameters
s
m
obile
MC55_ATC_V01.05 Page 282 of 469 2/10/04
Confidential / Released
Data Compression Format
Note: Only the default value needs to be implemented. Use test command to check which parameter values are
really possible!
[0] 1-D modified Huffman
1 2-D modified read
2 2-D uncompressed mode
Error Correction Mode
Note: Only the default value needs to be implemented. Use test command to check which parameter values are
really possible!
[0] disable ECM
1 enable ECM, 64 bytes/frame
2 enable ECM, 256 bytes/frame
Page Length
0 A4, 297mm
1 B4, 364mm
[2] unlimited length
modulation mode
3 V21 Ch2 - 300 bps
24 V.27ter - 2400 bps
27 V.27ter - 4800 bps
48 V.27ter - 7200 bps
72 V.29 - 7200 bps
96 V.29 - 9600 bps
Scan Time/Line
Note: Only the default value needs to be implemented. Use test command to check which parameter values are
really possible!
[0] 0 ms (at VR= normal)
1 5 ms
2 10 ms
3 10 ms
4 20 ms
5 20 ms
<df>
(num)
<ec>
(num)
<ln>
(num)
<mod>
(num)
<st>
(num)