Siemens MC55 - Manual (Page 293)

MC55 AT Command Set
11.10 AT+FDFFC
s
m
obile
MC55_ATC_V01.05 Page 293 of 469 2/10/04
Confidential / Released
11.10 AT+FDFFC Data Compression Format Conversion
Syntax
Command Description
This parameter determines the ME response to a mismatch between the data format negotiated for the fax ses-
sion, reported by the
<df>
subparameter, and the Phase C data desired by the controlling application, indicated
by the optional
AT+FDT <df>
subparameter, or the
AT+FDIS <df>
subparameter for
AT+FDR
operation.
Parameter Description
[0] Mismatch checking is always disabled. The controlling application has to check
the
<df>
subparameter and transfer matching data.
Notes
• For further information see
AT+FDIS
.
• Used for Fax Class 2 only.
Test Command
AT+FDFFC=?
Response(s)
(list of
<df>
s)
OK
Read Command
AT+FDFFC?
Response(s)
<df>
OK
Write Command
AT+FDFFC= <df>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
<df>
(num)