Siemens MC55 - Manual (Page 174)

MC55 AT Command Set
7.23 AT^SLCC
s
m
obile
MC55_ATC_V01.05 Page 174 of 469 2/10/04
Confidential / Released
• If multiple displays of identical list configurations occur, this happens because of intermediate states of the
list, that have already been overridden by new transitions and states. Thus, it is guaranteed that the configu-
ration displayed in such cases is the current configuration at the time of the last display.
• It is adviseable to receive URC "
^SLCC
" on an interface that is not used for call initiation, if verbose output is
configured. If only voice calls are expected, a setting of
AT^SM20
= 0 may be used alternatively in order to
keep the call from blocking the interface.
Examples
EXAMPLE 1
^SYSSTART
at+cpin=9999
OK
+CREG: 2
+CREG: 1,''0145'',''0016''
We are now registered
at^sm20=0
command ''ATD'' for an outgoing voice call will termi-
nate immediately with response ''OK''
OK
atd''1234567'';
We start a voice call.
OK
''OK'' response is issued immediately because of set-
ting ''^SM20=0''
^SLCC:
1,0,2,0,0,0,''1234567'',129,''Called
Party''
MO call starts, paging B-party
^SLCC:
End of current list
^SLCC:
1,0,2,0,0,1,''1234567'',129,''Called
Party''
Traffic channel established,
network may now transmit network announcements,
ME may now transmit DTMF tones.
^SLCC:
End of current list
^SLCC:
1,0,3,0,0,1,''1234567'',129,''Called
Party''
Call is now ringing at B-Party
^SLCC:
End of current list
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
B-Party has accepted the call, connection estab-
lished
^SLCC:
End of current list
atd23456;
We start a second voice call.
OK
''OK'' response is issued immediately because
another call is already active (cf.
ATD
)
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
The active call is automatically put on hold, triggering
the display of the list