Siemens MC55 - Manual (Page 169)

MC55 AT Command Set
7.22 AT+CLCC
s
m
obile
MC55_ATC_V01.05 Page 169 of 469 2/10/04
Confidential / Released
is 'UCS2'.
Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value
during early call phases (e.g. for
<stat>
= ''dialling'', ''incoming'' or ''alerting''), even if a phonebook entry is
present for the number concerned.
Note
• teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with
the handling for
AT+CSNS
, and may therefore occur in parameter
<mode>
for mobile terminated calls.