Siemens MC55 - Manual (Page 168)

MC55 AT Command Set
7.22 AT+CLCC
s
m
obile
MC55_ATC_V01.05 Page 168 of 469 2/10/04
Confidential / Released
1 held
2 dialing (MOC)
3 alerting (MOC)
4 incoming (MTC)
5 waiting (MTC)
bearer/teleservice
0 voice
1 data
2 fax
3 voice followed by data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
4 alternating voice/data, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
5 alternating voice/fax, voice mode (only in connection with single numbering
scheme
AT+CSNS
)
6 voice followed by data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
7 alternating voice/data, data mode (only in connection with single numbering
scheme
AT+CSNS
)
8 alternating voice/fax, fax mode (only in connection with single numbering
scheme
AT+CSNS
)
9 unknown
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
phone number in format specified by
<type>
type of address octect
145 dialling string
<number>
includes international access code character '+'
129 otherwise
Alphanumeric representation of
<number>
corresponding to the entry found in phonebook; used character set
should be the one selected with command
AT+CSCS
(Select TE Character Set).
The maximum displayed length of
<alpha>
is 16 characters. If the
<alpha>
has more than 16 characters, only
the first 15 characters will be displayed. To indicated an overflow, a special character will be used as the 16th
character. This will be a space if the character set selected with
AT+CSCS
is 'GSM', or 'E400' if the character set
<mode>
(num)
<mpty>
(num)
<number>
(str)
<type>
(num)
<alpha>
(str)(+CSCS)