Siemens MC55 - Manual (Page 381)

MC55 AT Command Set
15.6 AT^SPBD
s
m
obile
MC55_ATC_V01.05 Page 381 of 469 2/10/04
Confidential / Released
15.6 AT^SPBD Purge phonebook memory storage
This command is used to purge the selected phonebook
<storage>
manually, i.e. all entries previously stored
in the selected phonebook storage will be deleted.
CAUTION! The operation cannot be stopped nor reversed!
Automatic purging of phonebooks is performed when the SIM card is removed and replaced by a different SIM
card. This affects the ME-based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not
affected.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Command Description
The test command returns a list of supported
<storage>
s.
The write command is used to select the phonebook
<storage>
to be purged.
Test Command
AT^SPBD=?
Response(s)
^SPBD:
list of supported
<storage>
s
OK
+CME ERROR
Write Command
AT^SPBD= <storage>
Response(s)
OK
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
SIEMENS