Inter, Nal-counter, Reallocreq – Siemens MC55 User Manual
Page 389: Text, Location, Reallo, Creq, Internal, Counter, Obile
MC55 AT Command Set
15.8 AT^SPBS
s
m
obile
MC55_ATC_V01.05
Page 389 of 469
2/10/04
Confidential / Released
209
dialling string
contains printable non-alphabetic non-digit charac-
ters saved with the number string.
For phonebook entries with this <type>, dialling from phonebook with
is not possible. For further detail, check the parameter
descriptions for at command
129
otherwise
Text assigned to the phone number.
Is a display of the "real"
of the entry required?
[0]
Do not display an entry's "real" location number. Parameter
will
not be displayed
1
Display the "real" location number as parameter
at the end of the
entry
The location within phonebook memory at which the corresponding entry is located.
This location may be used for other phonebook commands (e.g.
,
).
0
(&F)
...maxindex
This Parameter is only an internal parameter and cannot modified directly.
The internal counter will be reset to index 0 after a call to
.
Note
• The complete list of sorted entries can be retrieved using AT command
Example
How to use AT^SPBS to browse through the sorted list forward and backward
Using AT^SPBS without
=0
• First,
is issued to make sure that AT^SPBS=1 starts from the first character in alphabetical order. The
example illustrates how to search down and up again.
<text>
(str)(+CSCS)
<RealLocReq>
(num)
<location>
(num)
<internal-counter>
(num)
at&f
OK
at^spbs=1
^SPBS:1,"+999999",145,"Arthur"
^SPBS:2,"+777777",145,"Bill"
^SPBS:3,"+888888",145,"Charlie"
OK