Avaya X330WAN - Manual (Page 110)

Chapter 6 X330WAN CLI Commands
88 Avaya X330WAN User’s Guide
For a list of all Interface Serial commands, see "Interface Serial CLI Commands" on
page 129.
Figure 6.1 illustrates the context hierarchy.
Figure 6.1 X330WAN CLI Contexts
For a list of the specific contexts for the X330W-2DS1, refer to Table 3.1 on page 24.
For a list of the specific contexts for the X330W-2USP, refer to Table 3.2 on page 27.
X330WAN CLI Prompts
The following table displays examples of X330WAN-2DS1 CLI prompts.
Table 6.1 X330WAN-2DS1 CLI Prompts
Mode/Context X330W-2DS1 Prompt X330W-2USP Prompt
User X330WAN-2DS1-N> X330WAN-2USP-N>
Supervisor X330WAN-2DS1-N(super)# X330WAN-2USP-N(super)#
Configure X330WAN-2DS1-N(configure)# X330WAN-2USP-N(configure)#
• Controller X330WAN-2DS1-N(config-
controller:n)#
X330WAN-2USP-N(config-
controller:n)#
• Interface Console X330WAN-2DS1-N(config-if:CON)# X330WAN-2USP-N(config-if:CON)#
• Interface Fast
Ethernet
X330WAN-2DS1-N(config-
if:FastEthernet1)#
X330WAN-2USP-N(config-
if:FastEthernet1)#
• Interface FabricFast
Ethernet
X330WAN-2DS1-N(config-
if:FabricFastEthernet1)#
X330WAN-2USP-N(config-
if:FabricFastEthernet1)#
• Interface Loopback X330WAN-2DS1-N(config-
if:LoopbackZ)#
X330WAN-2USP-N(config-
if:LoopbackZ)#
Controller Context - Interface Console Context or
- Interface Fast Ethernet Context or
- Interface Fabric Fast Ethernet Context or
- Interface Loopback Context or
- Interface Serial Context Other Contexts
User Mode
Configure Context/Supervisor Mode