Avaya X330WAN - Manual (Page 157)

Interface Serial CLI Commands
Avaya X330WAN User’s Guide 135
mtu (Serial interface context)
Use the mtu command to set the interface Maximum Transmission Unit (MTU). The
no form of this command restores interface MTU to the default value (1500).
Syntax
[no] mtu <size in bytes>
Parameters
Example
X330WAN-2DS1-1(config-if:Serial1:1)# mtu 1000
nrzi-encoding (X330WAN-2USP Serial interface context)
Use the nrzi-encoding command to enable the non-return-to-zero inverted
(NRZI-space) line-coding format on the interface. The no form of this command
disables NRZ encoding (default).
Syntax
[no] nrzi-encoding
Example
X330W-2USP-1(super-if:Serial2)# nrzi-encoding
queue-limit (Serial interface context)
Use the queue-limit command to set the packet size of the various queues.
Syntax
[no] queue-limit <queue id> <size>
Parameters
Example
X330WAN-2DS1-1(config-if:Serial1:1)# queue-limit 1 200
size in bytes An integer from 64 to 1500.
queue id The queue priority ID (1 - highest, 4 - lowest).
size The size of the queue, in packets. The total number of packets in all
queues can not exceed 5000.