Avaya X330WAN - Manual (Page 115)

General: Device Commands
Avaya X330WAN User’s Guide 93
copy tftp SW_image
Use the copy tftp SW_image command to update the software image and the
device manager applications of a designated device. To use this command, you
need to have an active TFTP server and create a file into which to download the
data. If Avaya MultiService Network Manager is running, an additional tftp server
is not required.
Syntax
copy tftp SW_image <sw-image-file> EW_archive <EmWeb_File>
<ip_address>
copy tftp SW_image <sw-image-file> EW_archive <ew_archive-file>
<ip_address>
Parameters
Example
X330WAN-2DS1-1(super)# copy tftp SW_image c:\p330\p330web101
EW_archive c:\p330\p330web201 192.168.49.10
dir
Use the dir command to show the file types that have been downloaded to the
device.
Syntax
dir
Example
X330WAN-2DS1-1(super)# dir
sw-image-file Common name for the files that contain the Software
Image and Embedded Web archive (full path).
EmWeb_File Embedded Web Manager image file name (full path).
ip_address The IP address of the TFTP server.
ew_archive-file Embedded Web Manager archive file.
M# file ver num file type file location file description
---- ----------------- --------- ----------------- ---------------- ---------------------
1 startup-config N/A Startup Conf Nv-Ram Startup Config
1 running-config N/A Running Conf Ram Running Config