Saving your configuration, X330wan default settings, Table 3.3 – Avaya X330WAN User Manual
Page 50: X330w-2ds1 default settings
Chapter 3
Initial Configuration
28
Avaya X330WAN User’s Guide
Saving Your Configuration
To save your configuration, type
copy running-config startup-config
. This
copies your X330WAN configuration from the current VRAM Running
Configuration to the Startup Configuration NVRAM.
Note:
Unsaved configurations are lost after each reset or after a power failure.
X330WAN Default Settings
The default settings for the X330WAN and its ports are determined by its firmware.
These default settings are subject to change. Newer versions of the software for the
X330WAN can be downloaded from the Avaya Network Software Download Web
si
Table 3.3 provides the X330W-2DS1 default settings.
Table 3.3
X330W-2DS1 Default Settings
Function
Default Setting
Port Speed (Fast Ethernet)
100 Mbps
Port Duplex (Fast Ethernet)
Full Duplex
Auto-Negotiation (Fast Ethernet)
Enabled
WAN mode (WAN)
T1
Framing (WAN)
SF for T1, CRC4 for E1
Linecode (WAN)
AMI for T1, HDB3 for E1
Clock Source (WAN)
line
Cable Length (for T1)
long, gain26, 0db
Speed (for T1)
56
SNMP Community
public
Avaya X330WAN CLI Entry Login
Login name:
root
, Password:
root