Avaya X330WAN - Manual (Page 38)

Chapter 2 Installation
16 Avaya X330WAN User’s Guide
Note: The cable and two adaptors can be found in the Avaya P330 accessory set, and
are clearly marked.
Removing an X330WAN Module from an Avaya P330 Switch
To remove an X330WAN module from a P330 switch:
1
Loosen the screws on the front panel of the X330WAN module that secure the
module to the P330 switch.
2 Grasp the two screw knobs and pull gently but firmly towards yourself.
The X330WAN module slides out of the slot.
3 Insert another expansion module or the blanking plate into the switch.