Avaya X330WAN - Manual (Page 112)

Chapter 6 X330WAN CLI Commands
90 Avaya X330WAN User’s Guide
clear screen
Use the clear screen command to clear the current terminal display.
Syntax
clear screen
clear snmp trap
Use the clear snmp trap command to clear an entry from the SNMP trap receiver
table.
Syntax
clear snmp trap {<rcvr_addr>|all}
Parameters
Example
X330WAN-2DS1-1(super)# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
clear timezone
Use the clear timezone command to restore the timezone to its default,
Coordinated Universal Time (UTC).
Syntax
clear timezone
copy running-config startup-config
Use the copy running-config startup-config command to copy the device
configuration from the current RAM Running Configuration to the NVRAM Startup
Configuration.
Syntax
copy running-config startup-config
rcvr_addr IP address of the trap receiver (the SNMP management station) to
clear.
all Keyword that specifies every entry in the SNMP trap receiver table.