Avaya X330WAN - Manual (Page 170)

Chapter 6 X330WAN CLI Commands
148 Avaya X330WAN User’s Guide
show frame-relay lmi
Use the show frame-relay lmi command to display the Frame Relay LMI
statistics.
Syntax
show frame-relay lmi [interface <interface name>]
Parameters
Example
X330WAN-2USP-1(super)# show frame-relay lmi
LMI Statistics for interface Serial 1 (Frame Relay DTE)
LMI TYPE = Auto Detect Mode
Invalid Unnumbered info 0, Invalid Prot Disc 0
Invalid dummy Call Ref 0, Invalid Msg Type 0
Invalid Status Message 0, Invalid Lock Shift 0
Invalid Information ID 0, Invalid Report IE Len 0
Invalid Report Request 0, Invalid Keep IE Len 0
Num Status Enq. Sent 0, Num Status msgs Rcvd 0
Num Update Status Rcvd 0, Num Status Timeouts 0
The following is a description of the show frame-relay lmi output fields:
interface name The name of the interface whose statistics are to be displayed.
Field Description
LMI TYPE The signalling or LMI specification: detected ANSI , detected
ITU-T , or Auto Detect mode.
Invalid
Unnumbered info
The number of LMI messages received with invalid,
unnumbered information fields.
Invalid Prot
Disc
The number of LMI messages received with invalid protocol
discriminators.
Invalid dummy
Call Ref
The number of LMI messages received with invalid dummy call
references.
Invalid Msg
Type
The number of LMI messages received with invalid message
types.
Invalid Status
Message
The number of LMI messages received with invalid status
messages.