Avaya X330WAN - Manual (Page 118)

Chapter 6 X330WAN CLI Commands
96 Avaya X330WAN User’s Guide
erase startup-config
Use the erase startup-config command to erase the NVRAM startup
configuration.
Syntax
erase startup-config
get time
Use the get time command to retrieve the time from the network.
Syntax
get time
Example
X330WAN-2DS1-1(super)# get time
Time is being acquired from server 0.0.0.0!
hostname
Use the hostname command to change the Command Line Interface (CLI) prompt.
The current device number always appears at the end of the prompt. Use the no
form of this command to return the CLI prompt to its default.
Syntax
[no] hostname [<hostname_string>]
Parameters
hostname_string none – Displays current hostname.
string – The string to be used as the hostname
(up to 20 characters).