Avaya X330WAN - Manual (Page 134)

Chapter 6 X330WAN CLI Commands
112 Avaya X330WAN User’s Guide
Parameters
Example
X330WAN-2DS1-1(config-if:CON)# speed 9600
timeout absolute (Console interface context)
Use the timeout absolute command to set the number of minutes until the system
automatically disconnects an idle PPP incoming session.
Syntax
timeout absolute <time>
Parameters
Fast Ethernet Interface CLI Commands
This section contains a list of all Fast Ethernet interface related CLI commands.
autoneg (FastEthernet interface context)
Use the autoneg command to set the port speed and duplex to auto-negotiation
mode for the external Fast Ethernet port. The no form of this command disables
auto-negotiation mode.
Syntax
[no] autoneg
9600 Sets a speed of 9600 bits per second.
19200 Sets a speed of 19200 bits per second.
38400 Sets a speed of 38400 bits per second.
time Number of minutes from 0 to 999, where 0 indicates that no timeout
should occur.