Avaya X330WAN - Manual (Page 126)

Chapter 6 X330WAN CLI Commands
104 Avaya X330WAN User’s Guide
show banner post-login
Use the show banner post-login command to display the post-login banner.
Syntax
show banner post-login
Example
X330WAN-2USP-1(super)# show banner post-login
show boot bank
Use the show boot bank command to display the software bank from which the
device boots at the next boot process.
Syntax
show boot bank
Example
X330WAN-2DS1-1(super)# show boot bank
Boot bank set to bank-a
show copy status
Use the show copy status command to show the status of the local
configuration copy operation.
Syntax
show copy status
Example
X330WAN-2DS1-1(super)# show copy status
Module #1
===========
Module : 1
Source file : startup-config
Destination file : running-config
Host : -
Running state : Idle
Failure display : (null)
Last warning : No warning