Avaya X330WAN - Manual (Page 222)

Chapter 6 X330WAN CLI Commands
200 Avaya X330WAN User’s Guide
Example
X330WAN-2DS1-1(super router:ospf)# show ip ospf database
Showing 1 rows
Area Type LSA ID Router ID Sequence Age Cksm
------- ----- ------------ ------------- -------- ----- ------
0.0.0.0 RTR 149.49.75.71 149.49.75.71 80000001 567 139b
show ip ospf interface
Use the show ip ospf interface command to display the OSPF-related
interface information.
Syntax
show ip ospf interface [<interface-name>]
Parameters
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., “New York”).
Example
X330WAN-2DS1-1(super router: ospf)# show ip ospf interface
sh ip ospf interface
Showing 1 OSPF Interfaces
FabricFastEthernet 1:1.0 is up
Internet Address 1.1.1.1, Mask 255.255.255.0 , Area 0.0.0.0
AS Router ID 1.1.1.1, COST 1
Transmit Delay 1, State DR, Priority 1
DRId 1.1.1.1, IpAddress 1.1.1.1
BDRId is 0.0.0.0, IpAddress 0.0.0.0
Timer Intervals Configured:
Hello 10
Dead 40
Retransmit 5
Neighbor count 0
interface-name A string representing the OSPF interface name.