Ip access-list-dscp trust, Ip access-list-name, Ip access-list-dscp trust ip access-list-name – Avaya X330WAN User Manual
Page 235
Policy CLI Commands
Avaya X330WAN User’s Guide
213
Parameters
Example
X330WAN-2DS1-1(super)# ip access-list-dscp precedence 101 16
mandatory
ip access-list-dscp trust
Use the
ip access-list-dscp trust
command to set a DSCP trust.
Syntax
ip access-list-dscp trust
<policy-list-number> {untrusted
|
trust-cos
|
trust-dscp
|
trust-cos-dscp}
Parameters
Note:
To return to the default value, enter this command with
trust-cos
option.
Example
X330WAN-2DS1-1(super)# ip access-list-dscp trust 101 trust-dscp
ip access-list-name
Use the
ip access-list-name
command to set a name for a Policy list.
Syntax
ip access-list-name
<policy-list-number> <name>
Parameters
Example
X330WAN-2DS1-1(super)# ip access-list-name 101 morning
policy-list-number
An integer from 100 to 149, where 0 is the default list.
dscp
DSCP entry, from 0 to 63.
precedence
mandatory|optional
policy-list-number
An integer from 100 to 149. 0 is the default list.
policy-list-number
An integer from 100 to 149, where 0 is the default list.
name
List name.