Avaya X330WAN - Manual (Page 194)

Chapter 6 X330WAN CLI Commands
172 Avaya X330WAN User’s Guide
Parameters
Example
To add station 192.168.37.46 as a BOOTP/DHCP server to handle BOOTP/DHCP
requests:
X330WAN-2DS1-1(configure)# ip bootp-dhcp server 192.168.37.46
ip broadcast-address (Interface context)
Use the ip broadcast-address command to update the interface broadcast
address.
Note: This command is executed from the Serial, Fast Ethernet, and
FabricFastEthernet interfaces.
Syntax
ip broadcast-address <bc addr>
Parameters
Example
ip broadcast-address 192.168.255.255
ip default-gateway
Use the ip default-gateway command to define a default gateway (router).
The no form of this command removes the default gateway.
Syntax
[no] ip default-gateway {<ip-address> | <interface-type> <interface-
number>} [<cost>] [<preference>] [permanent]
Parameters
ip-address The IP address of the server.
bc addr The broadcast IP address.
ip-address The IP address of the router.
interface-type The interface type.
interface-number The interface name.
cost The path cost. The default is 1.