Avaya X330WAN - Manual (Page 198)

Chapter 6 X330WAN CLI Commands
176 Avaya X330WAN User’s Guide
ip distribution access-list-owner
Use the ip distribution access-list-owner command to set the Policy list
owner.
Syntax
ip distribution access-list-owner <policy-list-number> <owner>
Parameters
Note: To define a name that includes spaces, enclose the entire name in quotation
marks (e.g., “New York”).
Example
X330WAN-2DS1-1(configure)# ip distribution access-list-owner 78
“admin”
ip icmp-errors
Use the ip icmp-errors command to set ICMP error messages ON. The no form
of this command sets ICMP error messages OFF.
Syntax
[no] ip icmp-errors
ip max-arp-entries
Use the ip max-arp-entries command to specify the maximum number of
ARP cache entries allowed in the ARP cache. The no form of this command restores
to the default value of 4096. This command takes effect only after start-up.
Syntax
[no] ip max-arp-entries <value>
policy-list-number An integer from 1 to 99.
owner List owner.