Show module-identity, Show running-config, Show snmp – Avaya X330WAN User Manual
Page 128: Show module-identity show running-config show snmp
Chapter 6
X330WAN CLI Commands
106
Avaya X330WAN User’s Guide
show module-identity
Use the
show module-identity
command to display the device identity required
for acquiring a license.
Syntax
show module-identity
Example
show module-identity
X330WAN-2DS1-1(super)# show module-identity
Mod Module Identity
--- ---------------
1 1234567
show running-config
Use the show running-config command to show the RAM based
configuration currently running on the device.
Syntax
show running-config
show snmp
Use the
show snmp
command to display SNMP information.
Syntax
show snmp
Example
X330WAN-2DS1-1(super)# show snmp
Authentication trap enabled
Community-Access Community-String
---------------- ----------------
read-only public
read-write public
trap public
Trap-Rec-Address
Traps Enabled
---------------- ----------------