Avaya X330WAN - Manual (Page 182)

Chapter 6 X330WAN CLI Commands
160 Avaya X330WAN User’s Guide
0 packets input, 0 bytes
0 broadcasts received, 0 giants
0 input errors, 0 CRC, 0 abort
22 packets output, 704 bytes
0 output errors, 0 collisions
Serial 2.2 is down, line protocol is down
Internet address is 1.0.0.1, mask is 255.0.0.0
MTU 1500 bytes, Bandwidth 2048 Kbit
Encapsulation FRAME-RELAY IETF, loopback not set
Link status trap disabled
Last input never, Last output never
Last clearing of 'show interface' counters 00:59:21
0 input drops, 0 output drops, 0 unknown protocols
0 packets input, 0 bytes
0 broadcasts received, 0 giants
0 input errors, 0 CRC, 0 abort
0 packets output, 0 bytes
0 output errors, 0 collisions
The following is a description of the show interfaces output fields:
Field Description
Serial, Fast
Ethernet,
FabricFast
Ethernet, or
Loopback Indicates if the port is up or down. This value also indicates if
the interface is partially up, meaning that some of the
sub-interfaces are down.
Line protocol Indicates if the line is functional. This is monitored by keepalive
packets.
Primary
Management
Interface Displays the interface configured as Primary Management.
Physical address The MAC address (for Fabric and Ethernet interfaces).
IP address mask The IP address assigned to the interface.
MTU The Maximum Transmission Unit of the interface.
BW The Bandwidth of the interface in Kbps.