Avaya X330WAN - Manual (Page 152)

Chapter 6 X330WAN CLI Commands
130 Avaya X330WAN User’s Guide
Parameters
Example
backup delay 0 60
backup interface (Serial interface context)
Use the backup interface command to set a backup interface.
Syntax
backup interface <interface-type> <interface-number>
Parameters
Example
backup interface Serial 1:1
clear ip rtp header-compression
Use the clear ip rtp header-compression command to clear RTP compression
statistics either for all enabled interfaces or for a specific interface. To clear for all
enabled interfaces, do not enter an interface type and number.
Syntax
clear ip rtp header-compression [<interface type> <interface number>]
Parameters
Example
X330WAN-2USP-1(super)# clear ip rtp header-compression
failure delay The switchover delay to the backup interface, in
seconds. The default is 0.
secondary disable delay The revert to primary time, in seconds. The default
is 0. This value can also be set to
never .
interface-type The interface type, a string.
interface-number The interface number.
interface type The type of interface.
interface number The interface number.