Avaya X330WAN - Manual (Page 98)

Chapter 4 Operational Concepts and Configuration Examples
76 Avaya X330WAN User’s Guide
Configuration Example for Site B
The following is the configuration procedure for the X330WAN-2DS1, as shown in
Figure 4.12:
•
Loopback and PMI interfaces configuration:
X330WAN-2DS1-1(super)# interface Loopback 1
X330WAN-2DS1-1(super-if:Loopback1)# ip address 20.20.20.20 32
The Primary management interface has changed. Please copy the running
configuration to the start-up configuration file, and reset the
device.
X330WAN-2DS1-1(super-if:Loopback1)# exit
X330WAN-2DS1-1(super)# copy running-config startup-config
X330WAN-2DS1-1(super)# reset
• - FabricFastEthernet interface configuration:
X330WAN-2DS1-1(super)# interface FabricFastEthernet 1:1
X330WAN-2DS1-1(super-if:FabricFastEthernet1:1)# ip address
149.49.47.1 24
X330WAN-2DS1-1(super-if:FabricFastEthernet1:1)# ip bootp-dhcp server
10.200.231.251
X330WAN-2DS1-1(super-if:FabricFastEthernet1:1)# exit
• Configuration of a Policy list with the appropriate DSCP-CoS mappings:
X330WAN-2DS1-1(super)# set qos policy-source local
X330WAN-2DS1-1(super)# ip access-list-name 100 voice
X330WAN-2DS1-1(super)# ip access-list-dscp operation 100 34 fwd7
X330WAN-2DS1-1(super)# ip access-list-dscp operation 100 46 fwd6
X330WAN-2DS1-1(super)# ip access-list-dscp trust 100 trust-cos-dscp
• Activating the Policy List on the FabricFastEthernet interface:
X330WAN-2DS1-1(super)# interface FabricFastEthernet 1
X330WAN-2DS1-1(super-if:FabricFastEthernet1)# ip access-group 100 in
X330WAN-2DS1-1(super-if:FabricFastEthernet1)# exit
• Serial interface configuration:
X330WAN-2DS1-1(super)# controller t1 1
X330WAN-2DS1-1(super-controller:1)# linecode b8zs
X330WAN-2DS1-1(super-controller:1)# framing esf
X330WAN-2DS1-1(super-controller:1)# channel-group 1 timeslots 1-24
speed 64
X330WAN-2DS1-1(super-controller:1)# exit
X330WAN-2DS1-1(super)# interface Serial 1:1
X330WAN-2DS1-1(super-if:Serial1:1)# ip address 192.168.2.5 30